What Are the Small Loops Inside a Kilt For?

Identify the fabric loops inside a kilt, tell them apart from sporran loops and find out when to use a clamp-style hanger.

Two cream fabric hanging loops sewn inside the waistband of an open green and blue tartan kilt.

Small fabric loops sewn inside a kilt’s waistband are usually hanging loops. They’re there for storage, and some kiltmakers leave them out altogether. If the kilt is heavy or the cloth sags when you lift it by the loops, use a sturdy clamp-style kilt hanger that supports the waistband.

Check where the loops are sewn

Open the kilt flat on a clean surface and look at the inside edge of the waistband. A hanging loop is usually a short length of fabric tape or ribbon with both ends sewn in. If you find a pair of loops near the lining and neither one leads to a buckle, hanging loops are a good possibility. Jeeves of Belgravia’s kilt care guide identifies these small interior loops on some off-the-rack kilts.

Loops along the outside near the back pleats can serve a different purpose. Nicolson Kiltmakers uses two loops near the waist on its traditional kilts to hold the sporran chain in place. Construction varies, so check your maker’s instructions before routing a strap through an unfamiliar loop. The leather fastening straps, where fitted, connect to their corresponding buckles.

Should you hang the kilt by those loops?

Look at how the garment’s weight is supported. Two narrow tapes may pull the waistband up at those points while the rest hangs lower. The Kilt Experience recommends a clamp hanger that supports the weight and says it leaves hanging loops off its own handmade kilts because loop hanging can cause sagging.

If your maker recommends a particular hanger, follow its instructions. Let the kilt air and dry first, then check that the waistband is held evenly and the pleats fall straight. Give the cloth room to hang freely. For advice on flat storage and keeping metal accessories off the cloth, see our guide to storing a kilt.

Should you cut the loops off?

Leave the loops in place if you simply prefer a clamp hanger. A pair of tapes stitched into the waistband is different from the removable basting that some makers run across the lower pleats for delivery. If you see a loose thread or a damaged loop and can’t identify it, take a photo of the area and ask the maker or hire shop before cutting anything. Our guide to identifying temporary basting stitches shows what to check.

Back to blog

Explore related collections

Choosing your Highland accessories

Check the size guide and available options on each product before ordering.

Use the tartan finder to explore ties, hats and flashes by their existing tartan names.

Pair kilt hose with flashes, then choose the colour and size that suit your outfit.